3-Way Diverter Port Valve

You are here

Description

reduces cost and space

 

Specifically Designed for Pharmaceutical, Biotech, Food, Beverage, Cosmetic and other Sanitary and Clean Steam Processes

 

  • 3-Way valve with an integral side-entry or bottom entry common port.   Seats shall provide both upstream and downstream bubble-tight seal and be adjustable for in-line wear.
  • A single Diverter Port can replace two or three 2-Way valves to reduce cost and space.
  • A Diverter Port valve can be an economical alternative to a 3-Way multi-port valve, depending on the sealing requirements.
  • An excellent choice for mounting two relief valves from a common pressure source.
  • Adjust-O-Seal®  design allows the valve seat seal to be restored in-line to a leak-tight condition to compensate for normal seat wear.
  • Swing out/Lift out Design for easy removal and installation.
  • Live-loaded stem packing
  • True-Bore® (valve bore same as connecting tubing) – no puddling
  • Stem assembly accommodates PBM Direct Mount Actuation for accurate alignment and increased cycling life.
  • Transflow (the gradual media flow that occurs as one port opens and another closes) prevents dead-heading and damage to pumps. Most flow patterns support transflow.


Downloads

PRODUCT OVERVIEW

  • Sizes 1/2" – 6”
  • Materials:  316L, low ferrite cast and forged, Hastelloy™, others
  • End Connections: Extended tube and hygienic clamp, others
  • Standard TFM™ or S-TEF® seats / seals
  • Working Pressures:  up to 900 psig (62.1 bar) depending on valve series, size and temperatures
  • Temperature Range:  up to 450˚F (232.2˚C), depending on seat and seal material
  • Cv Values (gpm):  3.0 to 1,750 depending on port and end connection*
  • ASME BPE Compliant
  • Valves are rated for full vacuum.
  • Variety of mechanical polish finishes as well as electropolish
  • US, DIN, & ISO True-Bore® Port Diameters
  • USP Class VI elastomers and FDA complaint materials available
  • Certified Material Test Reports (CMTRS) provided for wetted components

OPTIONS

  • Available in (9) flow patterns
  • Optional body cavity fillers minimize areas where media could become trapped and contaminate the process.
  • Full Range of Automation and Controls

About

PBM (Pittsburgh Brass Manufacturing) is a  company over 100 years old that began as a non-ferrous foundry in 1899 along the Monongahela River in Pittsburgh.

 

GET IN TOUCH

  • Address: 1070 Sandy Hill Road,
       Irwin, PA 15642
  • Phone: 724-863-0550 / 800-967-4PBM
  • Email: info@pbmvalve.com