Actuation and Controls

You are here

Description

quality and reliability

 

PBM’s rack and pinion pneumatic actuators are suitable for use in aggressive environments. The sizes range from torques of 38 up to 25,000 in lbs. in both Double Acting and Spring Return version.

 

  • Twin Rack and Pinion Design
  • Constant torque output
  • Compact design
  • Balanced internal forces
  • Robust design to ensure long life.


Downloads

PRODUCT OVERVIEW

  • Body manufactured from extruded aluminum UNI 6060
  • Concentring spring sets
  • Die Cast Aluminum End Caps
  • Stainless Steel Assembling Screws
  • Pinion Made in Steel
    • Nickel-plated for standard version against internal and external corrosion
    • Stainless steel for corrosive environments upon request.
    • Anti-blowout design
  • Cam for limit position adjustment 0˚ - 90˚
  • Pistons made from Die Cast Aluminum
  • Seals
    • NBR standard version
    • Viton high temperature version
    • Silicon low temperature version
  • Optional Epoxy coating available

ELECTRIC ACTUATORS

An electric actuator designed for a wide range of torque requirements. The actuator comes standard with two auxiliary switches (shared common, rated
at 3A 250V Max), an internal low power heater, a NEMA 4X environmental rating, and in 12VAC/DC, 24VAC/DC, 120VAC or 230VAC supply voltages.  The actuator’s mechanical connections are ISO5211 compliant, utilizing an F03/F05 bolt pattern and an 8 point 14mm female drive. PBM’s electric actuator is available
as on/off or two position models that can also be used in bump/jog applications. It can also be ordered with an internal proportional control card that accepts a wide range of control signals and generates multiple feedback signals.

  • Weatherproof, explosion proof
  • Modulating or On/Off
  • 2,3,4 position

About

PBM (Pittsburgh Brass Manufacturing) is a  company over 100 years old that began as a non-ferrous foundry in 1899 along the Monongahela River in Pittsburgh.

 

GET IN TOUCH

  • Address: 1070 Sandy Hill Road,
       Irwin, PA 15642
  • Phone: 724-863-0550 / 800-967-4PBM
  • Email: info@pbmvalve.com