Clean Steam True Bore® Valve

You are here

Description

minimizes dead space

 

Specifically Designed for Pharmaceutical, Biotech, Food, Beverage, Cosmetic and other Sanitary and Clean Processes

 

PBM’s Igenix® line of sanitary valves is ideally suited for pure process applications where dead space within the valve need to be minimized. PBM valves exhibit high performance to accompany the high temperature requirements and temperature swings of steam applications and other elevated temperature applications.

 

  • Deadleg piping is reduced where condensate can cool and cause contamination.
  • Clean-in-place/Steam-in-place capability
  • Unique Adjust-O-Seal® feature allow in-line valve adjustment to compensate for normal wear on valve seats.
  • Metal-encapsulated ring that minimizes seat flow due to heat softening the seat and dragging it into the process stream
  • Metal-encapsulated body seal to eliminate cold flow (compression deformed the seal) and reduce recesses where media could accumulate and contaminate the process.
  • O-ring primary body seals to provide a tight seal, preventing external leakage
  • Belleville washers on body bolt to maintain pre-load on body bolts keeping valve leak tight through thermal cycles
  • Enhanced live-loaded steam packing design to provide compensation for wear and differential thermal expansion.


Downloads

OVERVIEW

  • Sizes ¼” – 6”, depending on series
  • Materials: 316L, low ferrite cast and forged, Hastelloy™, AL6XN™, others
  • End Connections: Extended tube, hygienic clamp, others
  • Standard TFM™ seats / seals
  • Working Pressures: up to 720 psig (49.6 bar) depending on valve series, size and temperatures
  • Temperature Range: up to 450˚F (232.2˚C), depending on seat and seal material
  • Cv Values (gpm): 8.9 to 3,750 depending on end connection*
  • ASME BPE Compliant
  • Optional purge and condensate ports create an aseptic CIP/SIP valve.
  • Fire Rated Option, tested to API-607
  • Available in variety of materials including 316L, low ferrite cast and forged, Hastelloy™, AL6XN™, others
  • Variety of mechanical polish finishes as well as electropolish
  • Variety of end connections including extended tube or pipe weld ends, hygienic clamp, compression
  • Optional Patented Locking Lever Handle
  • Optional cavity fillers to minimize body cavity voids.
  • Optional extended stem to allow space to clear insulation.
  • Certified Material Test Reports (CMTRS) provided for wetted components
  • Full Range of Automation and Controls

About

PBM (Pittsburgh Brass Manufacturing) is a  company over 100 years old that began as a non-ferrous foundry in 1899 along the Monongahela River in Pittsburgh.

 

GET IN TOUCH

  • Address: 1070 Sandy Hill Road,
       Irwin, PA 15642
  • Phone: 724-863-0550 / 800-967-4PBM
  • Email: info@pbmvalve.com