Sanitary Igenix® Block & Bleed

You are here

Description

designed to ASME B16.34

 

Specifically Designed for Pharmaceutical and Biotech Applications

 

Use PBM’s Igenix® Sanitary Block Bleed Valve is designed to safely isolate the instrument for service. This valve allows pressure to be vented safely prior to removing the instrument in place.

  • Adjust-O-Seal® design safely allows for process isolation and instrument bleed.
  • Ability to isolate, bleed off pressure and safely remove instruments on continuous service (i.e. clean steam lines).
  • Allows instruments to be removed for calibration or replacement without shutting down main process lines.
  • Retrofitable center section for existing installed PBM valve.
  • Available in redundant configurations


Downloads

PRODUCT OVERVIEW

Problem:

Common instrument isolation valves retain pressure at the instrument even when the isolation valve is off.

 

Safe Solution:

PBM Sanitary Block Bleed Valve prevents pressure build up near instrument.Once the instrument is de-energized, it allows the operator to safely disconnect the instrument.

About

PBM (Pittsburgh Brass Manufacturing) is a  company over 100 years old that began as a non-ferrous foundry in 1899 along the Monongahela River in Pittsburgh.

 

GET IN TOUCH

  • Address: 1070 Sandy Hill Road,
       Irwin, PA 15642
  • Phone: 724-863-0550 / 800-967-4PBM
  • Email: info@pbmvalve.com