Spray Ball Valves

You are here

Description

Cleans tanks & vessels

 

Specifically Designed for cleaning inside tanks and other vessels

The spray nozzle is not exposed to the inside of the vessel. This minimizes the potential for clogging or damage caused either by the process or by scraping the inside tank walls during cleaning or processing.

  • Valve mounts flush with the inside vessel wall, minimizing dead space.
  • Valve can be located anywhere on the vessel to accommodate specific needs.
  • Many standard nozzles can be used in the Angle Stem Spray Ball Valve.
  • Angle Stem Spray Ball Valve allows actuator clearance on jacketed or insulated tanks.
  • Easily used while still maintaining a vacuum.


Downloads

About

PBM (Pittsburgh Brass Manufacturing) is a  company over 100 years old that began as a non-ferrous foundry in 1899 along the Monongahela River in Pittsburgh.

 

GET IN TOUCH

  • Address: 1070 Sandy Hill Road,
       Irwin, PA 15642
  • Phone: 724-863-0550 / 800-967-4PBM
  • Email: info@pbmvalve.com